Custom-cut vinyl lettering made from 2 mil adhesive vinyl. Different colors to choose from, with the option to include multiple colors in your design. Design online or upload your own file to create 100% custom lettering! Starting at $CALL.
Vinyl lettering includes lettering, numbering, or shapes that are individually cut out from a sheet of solid colored, 2-mil vinyl and then pre-spaced and placed onto pre-masked transfer tape (the number of transfer tape sheets used will depend on the size of your vinyl lettering and amount of colors used). This allows the lettering to be easily installed as one piece, creating a clean and professional look.
Easy to Apply and Made to Last
- Pre-spaced and pre-masked for easy all at once install
- Works on many different smooth, non-porous surfaces
- Made from durable vinyl designed to last over 8 years and avoid cracking and embrittlement
- UV and Water Resistant
How to Install Vinyl Lettering
All of our vinyl lettering comes pre-spaced and pre-masked with transfer tape, making installation a simple, all-at-once process. Follow the step by step instructions below to help you get it installed exactly as you want it. The instructions below are for one-color and simple two-color letters and graphics. For orders with complex two-color designs or three or more colors, due to both production and installation quality purposes, you will install your vinyl lettering layer by layer for the same seamless and professional look.
1. Thoroughly clean and dry the surface where the lettering will be installed.
2. After measuring and marking your intended installation location if necessary, apply a horizontal strip of masking or painters tape to the top of the graphic with the top half of the tape on the intended surface, creating a hinge.
Note: Designs with three or more colors will require you to place individually colored layers on your wall. Two vinyl dots (one in the upper left corner and one in the bottom right corner of each layer) will be used to help align individual layers.
3. Hold the bottom edge of the hinged graphic away from the intended surface and remove the back liner (which is different from the transfer tape), revealing the sticky backing of your lettering or graphic. Be careful not to allow the exposed adhesive to touch the surface.
4. Using a squeegee*, apply pressure to the front or pre masked side of your lettering, placing the graphic onto the intended surface. Squeegee from left to right from the top down. If creases or bubbles develop, carefully lift the graphic and re-squeegee it. *Available for purchase with vinyl lettering.
5. Once in place without creases or bubbles, squeegee the entire lettering or graphic to ensure the adhesive is firmly attached to the surface.
6. Gently remove the pre-mask transfer tape, starting at a top corner. If any vinyl begins to come off the wall, use your squeegee to firmly adhere it back to the wall and continue peeling away the premask.
7. Laying the liner over the graphic with the shiny side facing you, apply hard pressure with the squeegee, removing any stubborn air bubbles.
As noted above, for vinyl lettering with three or more colors your order will have one layer per color. Repeat steps 2-7 and use the registration marks in the in the upper left and bottom right corners to ensure proper alignment and installation.
Care: Your vinyl lettering can be washed on a regular basis with a damp non-abrasive rag. This will clear it of dust or grime without damaging the lettering. Do not use strong cleaners or scrub vigorously as both of these actions may damage and/or peel away the lettering from the surface where applied.